Vittorazi Moster185 EFI - M021b - Antivibrations-Halterung 30 x 30 mm - M8 x 25 mm (Set mit 2)

Technische Details

• r . 10 Nm Moster 185 EFI - Maintenance manual - V 4 158 Replace the rubber (3). each time they are disassembled. Insert the rubber (3), the 2 washers (2) and the Allen screw M8x25 (1) with threadlocker (recommended Loxeal 83 - 55/Loctite 270) and tighten with the torque shown in the figure . Insert the EGT sensor (see chapter 3.7.4 EGT sensor assembly). 1 3 Nm Moster 185 EFI - Maintenance manual - V 4 159 3 . 13 Rubber mountings Components to replace Time limit Engine rubber mountings (M021a, M021b). 150h or 1 year Exhaust system rubber mountings (M151a, M151c). 150h or 1 year Loxeal 55 - 03/Loctite 243 . * Special tools Not required. Values Self - locking nuts M6 (rubber mountings M021 a , M 021b ): 18 Nm. Ring nuts DIN 981 - KM4: 20 Nm S crews M4x6 : 1.6 Nm Self - locking nuts M8 ( rubber mountings M151c ) : 18 Nm Self - locking nuts M8 (rubber mountings M151a ): 15 Nm. *Always replace it when disassembled. 3. 13 .1 Rubber mountings disassembly Before proceeding with the next operations
• Air rotary valve screws 6 Nm M6x60 Loxeal 55 - 03/ Loctite 243 Air rotary valve lever screw 2,5 nm M4x8 Air rotary valve flange screws 8 Nm M5x25 Reed valve petals screws 1,5 Nm M3x5 Battery self - locking nuts 5 Nm M5 Exhaust nuts 32 Nm M8 Copper paste Silencer nuts 10 Nm M6 The table follows in the next page Moster 185 EFI - Maintenance manual - V 4 238 Component Torque value Thread size Lubricant/ sealant Silencer screw 13 Nm M8x25 Loxea l 83 - 55/ Loctite 270 Rubber mounting nuts (M021 a, M021b, M151c) 18 Nm M8 Rubber mounting nuts (M151a) 15 Nm M8 Exhaust support plate’s nuts 15 Nm / 18 Nm M8 Rubber mountings ring nuts 20 Nm Electric starter screw s 10 Nm M6x25 Electric starter fixing plate screw s 10 Nm M6x25 Ring gear screws 4,1 Nm M4x16 Flywheel nut 52 Nm M10x1,25 Spark plug cable fixing clamp screw Hand tighten M4x20 Aluminium toothed pulley’s screws 8 Nm M5x20 Loxeal 55 - 03/ Loctite 243 R ing gear cover screws 10 Nm M6x14 Clutch 20 Nm The table follows in the next page Moster 1
• ey are disassembled. I nsert the following components into the silencer support band (3): the bushing (2), the rubber spacer (4), the rubber spacer with washer (5), the Allen screw M8x2 5 (1) with threadlocker (recommended Loxeal 83 - 55) and tighten with the torque shown in the figure. Insert the EGT sensor (see chapter 3.7.4 EGT sensor assembly). 1 3 Nm 10 Nm Moster 185 EFI - Maintenance manual - V 5 163 3 . 13 Rubber mountings Components to replace Time limit Engine rubber mountings (M021a, M021b). 150h or 1 year Exhaust system rubber mountings (M151a, M151c). 150h or 1 year Loxeal 55 - 03/Loctite 243 . * Special tools Not required. Values Self - locking nuts M6 (rubber mountings M021 a , M 021b ): 18 Nm. Ring nuts DIN 981 - KM4: 20 Nm S crews M4x6 : 1.6 Nm Self - locking nuts M8 ( rubber mountings M151c ) : 18 Nm Self - locking nuts M8 (rubber mountings M151a ): 15 Nm. *Always replace it when disassembled. 3. 13 .1 Rubber mountings disassembly Before proceeding with the next operations